Jobs off the machine

Proof, rather than promises.

Photographed on the bed before they went out. If your job looks like one of these, you already know we can do it. If it does not, ask anyway.

This page is the most important one you cannot fake

The four cards below are a template showing the format, not real jobs. Do not publish this page until you have at least four genuine ones. An honest "we are just starting, here is what the machine can do" page beats invented job history, and a trade customer who spots one fabricated case study will not send you the second enquiry.

Photograph every single job for the first six months, even the boring ones. Ask the customer if you can name them. Half will say yes, and a named customer is worth ten anonymous ones.

Photo slot Parts on the bed, before removal 3:2 · 1800 × 1200

Job 0031Shopfitter, Bury

42 fixing gussets

18 mm birch ply · 2 sheets · 94% yield · 2 days

Repeat order off the same file as last time, which is the cheapest kind of job for everyone. Nested tight enough to get all 42 out of two sheets with a usable offcut left over.

Photo slot Parts on the bed, before removal 3:2 · 1800 × 1200

Job 0034Kitchen fitter, Rochdale

End panels and plinths

18 mm MR MDF · 3 sheets · 81% yield · 3 days

Supplied as a sketch on a piece of plasterboard, redrawn here for £45, then cut. Sometimes that is genuinely the fastest route.

Photo slot Parts on the bed, before removal 3:2 · 1800 × 1200

Job 0036Exhibition builder, Manchester

Stand lettering, 400 mm caps

19 mm Valchromat · 1 sheet · 58% yield · same week

Low yield because letters nest badly, and we said so before quoting rather than after. Customer chose to accept it rather than change the typeface.

Photo slot Parts on the bed, before removal 3:2 · 1800 × 1200

Job 0039Private customer

One replacement cabinet door

18 mm birch ply · offcut stock · 1 part · next day

A single door to match an existing run. Cut from offcut, charged at the £35 minimum. This is the job most bureaux turn away.

Got something similar?

Price it yourself in a minute, or send the file and we will come back with a firm number.

Use the estimator Send a file